top of page

linear classics  LCI 2

1013-0065.jpg

Award

​Grand Prix

Middle Class

Grand Prize

Special Grand Prize

Grand Prix

The Long-Awaited Integrated Amplifier from the “Linear Classics” Series

Aura, which made a comeback with the VA 40 rebirth integrated amplifier—designed and produced to commemorate the company’s 35th anniversary—has launched a new series called “Linear Classics.” The third model in the series is the LCI 2 integrated amplifier, the successor to the VA 40 rebirth. Like the LCP 1 and LCC 1, the LCI 2 features a front panel measuring 55 mm in height and 430 mm in width and is built with a linear power supply. Designed and manufactured in Japan, the LCI 2 incorporates the world-renowned precision metalworking of Tsubame-Sanjo, a hallmark of the entire “linear classics” series. Its beautiful design, rooted in pure analog engineering, exudes a confidence that its value will endure well into the future.

An Integrated Amplifier That Capitalizes on Traditional Strengths

he elaborate design—featuring a large heat sink mounted on top to house the MOSFETs used in the VA 40 rebirth, with the main circuit board supported upside-down by rods beneath it—garnered attention as a unique structure that maximizes the performance of power devices in terms of thermal management. To achieve the driving capability required to handle even low-efficiency speakers, the LCI 2 employs large power devices and further evolves this groundbreaking cooling system. By utilizing more than half the surface area of the lid as a large heat sink, heat dissipation is enhanced; furthermore, slits between the heat sinks improve separation to minimize interference between the left and right power devices. The LCI 2 was developed as an integrated amplifier with high power-handling capability, while prioritizing the responsive performance and low-level linearity unique to single-push-pull designs.

● Upgraded Power Devices

It is no exaggeration to say that the single push-pull configuration of the output-stage MOSFETs is the very essence of Aura. The MOSFETs used in the LCI 2 are a combination of EXICON’s EXW20N20 and ECW20P20. Compared to the devices used in the VA 40 rebirth, these offer a higher rated current.

 

●Power Supply Featuring a Custom-Made Flat Toroidal Transformer

One of the hallmarks of Aura amplifiers is the use of a linear power supply that delivers superior sound quality. For the LCI 2, an ultra-thin toroidal transformer was custom-made to fit within a 55mm-tall chassis. This high-quality transformer, meticulously wound, produces virtually no vibration-induced noise. To ensure sufficient output with a single power device, high-capacity components—including the transformer, capacitors used in the power supply section, and the output relay—were selected to provide ample drive capability.

​

●Use of High-Quality Components

The unit incorporates a variety of high-quality components—such as VISHAY metal-film resistors, high-grade capacitors from the NICHIKON MUSE series, and relays with gold-clad contacts—that take the original model to a whole new level.

◆Comparison with the VA 40 rebirth

〇Power Devices  

VA 40 rebirth  EXICON ECX10P20 / ECX10N20  Single push-pull
LCI 2         EXICON EXW20N20 / ECW20P20  Single push-pull  
* Rated output is double


〇Enclosure
VA 40 rebirth: Stainless steel front panel; top and sides made of folded steel
LCI 2: “Linear Classics” specification composite material case (front panel: 6mm-thick extruded aluminum with stainless steel panel insert; sides: 6mm-thick steel; top: large aluminum heat sink with stainless steel) 


〇Power Supply Circuit
VA 40 rebirth: Components arranged on the main board in a manner faithful to the original design; power transformer capacity: 200VA
LCI 2: Separate power supply board; features a custom-made power transformer. Due to limited vertical space inside the unit, a custom-made, slim-profile transformer with a larger surface area was adopted to ensure a capacity of 200VA.

Aura  LCI 2  Product Specifications

■Input terminal

PHONO(MM) ×1

LINE ×3

■Rated output  50W+50W (8Ω)

■THD  0.02% (LINE, 8Ω, 1kHz, 12.5W)

■S/N ratio (8Ω, 1kHz, IHF-A)

PHONO(MM)       82dB (5mV input、Rated output)

LINE                    102dB (2V input、Rated output)

■Frequency characteristic  10Hz~50KHz +0dB, -6dB (LINE, 8Ω, 1W)

■Input sensitivity / Input impedance

PHONO(MM)       2.9mV (8Ω) / 47kΩ、100pF

LINE                    205mV (8Ω) / 50kΩ

■Maximum allowable input  PHONO(MM)              100mV

■Headphone rated output  320mV (32Ω)

■Power supply  AC230V, 50/60Hz

■Fuse  5×20mm, T2.5AL 250V

■Power consumption  110W (1/8 rated output)

■Standby power consumption  4.5W

■Size  W430mm×H71m×D350mm

■Weight  8.1kg

Copyrighits (c)Yukimu Corporation.Ltd, All Righits Reserved.

株式会社yukimu(東京都品川区大井1-41-9)   TEL:03-5743-6202

© 2023 著作権表示の例 - Wix.com で作成されたホームページです。

Copyrighits (c)Yukimu Corporation.Ltd, All Righits Reserved.

bottom of page